José Duarte

Professor of Landscape Architecture

Most Recent Publications

Rectangular floor plans with block symmetry

Shiksha Shiksha, Krishnendra Shekhawat, Sujay Rastogi, Jose Duarte, Aishwarya Kondaveeti,

Design Optimization Workflow for 3D Concrete Printing of Roofing Structures

Jose Pinto Duarte, Jose Pinto Duarte, N Brown, A Memari, S Nazarian,

Effects of anisotropic mechanical behavior on nominal moment capability of 3D printed concrete beam with reinforcement

Keunhyoung Park, A Memari, Maryam Hojati, A Radlinska, Jose Pinto Duarte, Shadi Nazarian, 2024, Buildings on p. 3175

Workflow for generating, simulating, and optimizing form and toolpath in 3D concrete printing of vaults

Gonçalo Duarte, Nathan Brown, Jose Pinto Duarte, 2024, Automation in Construction

Development of a Generative Design System for 3D-printed Houses in Chile

Rodrigo Garcia-Alvarado, Pedro Soza-Ruiz, Eduardo Valenzuela-Astudillo1, Daniela Martuffi-Lazo, Jose Pinto Duarte, 2024, Buildings on p. 2939

Flexural Strength of 3D Printed Concrete Beams: Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry

Maryam Hojati, Reza Sedghi, Zhanzhao Li, A Memari, S Nazarian, A Radlinska, Jose Pinto Duarte, 2024, on p. 342-350

A comprehensive review on integrating vision-based sensing in extrusion-based 3D printing processes: toward geometric monitoring of extrusion-based 3D concrete printing

Paniz Farrokhsiar, B Gursoy Toykoc, Jose Pinto Duarte, 2024, Construction Robotics on p. 23

Design for early-age structural performance of 3D printed concrete structures: A parametric numerical modeling approach

Goncalo Duarte, Jose M. Pinto Duarte, Nathan Brown, N Brown, A Memari, Memari, Ali Memari, J Gevaudan, N Brown, J Duarte, Juan Gevaudan, 2024, Journal of Building Engineering on p. 109986, 30

Enabling Concurrent Reinforcement During 3D Concrete Printing (3DCP) to Create Spanning Structures Using Tensile Cables

Jose Pinto Duarte, S Nazarian, 2024,

Incorporation of 3D concrete printing technology for increasing energy and cost efficiencies in residential construction

Jose Pinto Duarte, S Bilén, S Nazarian, A Radlinska, 2024, in Memari, A. and Lowe, S.K. (eds) Proceedings of the 7th Residential Building Design and Construction Conference, The Pennsylvania State University, University Park, PA

Most-Cited Papers

Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0

Flávio Craveiro, José Pinto Duarte, Helena Bartolo, Paulo Jorge Bartolo, 2019, Automation in Construction on p. 251-267

Usability studies on building early stage architectural models in virtual reality

Rui de Klerk, André Mendes Duarte, Daniel Pires Medeiros, José Pinto Duarte, Joaquim Jorge, Daniel Simões Lopes, 2019, Automation in Construction on p. 104-116

An automated system for 3D printing functionally graded concrete-based materials

Flavio Craveiro, Helena Bartolo, Helena Bártolo, Shadi Nazarian, Helena Bartolo, Paulo Bartolo, Paulo Bártolo, Paulo Jorge Bartolo, S Nazarian, Jose Manuel Duarte, J Pinto Duarte, 2020, Additive Manufacturing on p. 10

Fresh and hardened properties of extrusion-based 3D-printed cementitious materials: A review

Zhanzhao Li, Maryam Hojati, Zhengyu Wu, John Piasente, Jonathon Piasente, Negar Ashrafi, Jose Duarte, Negar Ashrafi, José Duarte, J Pinto Duarte, Shadi Nazarian, Sven Bilen, Shadi Nazarian, Ali Memari, Sven Bilén, Sven Bilen, Aleksandra Radlinska, Ali Memari, Aleksandra Radlinska, 2020, Sustainability on p. 33

A design tool for resource-efficient fabrication of 3d-graded structural building components using additive manufacturing

F. Craveiro, H. M. Bartolo, A. Gale, J. P. Duarte, P. J. Bartolo, 2017, Automation in Construction on p. 75-83

A review of additive manufacturing for ceramic production

Eduardo Castro E. Costa, Jose M. Pinto Duarte, Paulo Bártolo, 2017, Rapid Prototyping Journal on p. 954-963

Shape-changing Architectural Skins A Review on Materials, Design and Fabrication Strategies and Performance Analysis

Elena Vazquez, Clive Randall, Jose Pinto Duarte, 2019, Journal of Facade Design and Engineering on p. 93-114

State of the Art Review of Reinforcement Strategies and Technologies for 3D Printing of Concrete

Zhengyu Wu, Ali Memari, Jose P. Duarte, 2022, Energies on p. 24

Evaluating the relationship between deposition and layer quality in large-scale additive manufacturing of concrete

Negar Ashrafi, Jose Pinto Duarte, Shadi Nazarian, Nicholas A. Meisel, 2019, Virtual and Physical Prototyping on p. 135-140

Experimental prediction of material deformation in large-scale additive manufacturing of concrete

Negar Ashrafi, Shadi Nazarian, Nicholas A. Meisel, Jose Pinto Duarte, 2020, Additive Manufacturing on p. 15